HighLine RCH Hydro, Operator'S Manual

Page: 21 / 101

Section 2 - Transporting the Mower
9. Attach the driveline to the PTO.
Shut off the tractor engine before
a t t a c h i n g
P T O d r i v e l i n e .
Entanglement in the rotating
driveline can cause serious injury
or death.
The mower shall not be operated
without the driveline shields in
place.
- Shut off the tractor engine and
remove the key.
- Check that the driveline telescopes
easily and that the shields are in good
condition and rotate freely.
- Lift the tractor PTO shield.
- Support the driveline, pull back on the
yoke collar, align the splines by
rotating the mower driveline and push
the driveline into the tractor PTO shaft
until the collar snaps into place.
- Push and pull the yoke several times
to ensure the driveline is locked. Do
not pull on the collar as this will
release the lock.
- Lower the tractor & hitch PTO shields
into place.
Attach Driveline to PTO
108167
Page 2-4