HighLine Bale Pro CFR650, Operator'S Manual

Page: 30 / 65

Section 3 - CFR 650 Preparation
8. Adjust the height of the hitch tongue.
Note: Do this procedure on level ground.
- Level the frame of the CFR 650 to
ensure the bale forks can lower for
loading a bale.
- Adjust the hitch tongue height to
connect with the tractor drawbar while
keeping the frame level.
- Fasten the tongue in place and torque
the bolts to 210 ft-lbs (285 Nm).
9. Set the level of the lower discharge
deflector.
- To adjust the bottom deflector,
stand in front of the machine, pull
the lower handle and raise or
lower the door as required.
- To increase the height of discharge,
raise the door to the one of the upper
slots.
- To lessen the height discharge,
position the door to one of the lower
slots.
Adjust Height of Hitch Tongue
201193
Set Level of Lower Discharge Deflector
214084-2
Page 3-3