HighLine Bale Pro CFR650, Operator'S Manual

Page: 18 / 65

Section 2 - Transporting the CFR 650
2.0 TRANSPORTING THE CFR 650
Only tow the CFR 650 behind a
properly sized and equipped
tractor which exceeds the loaded
weight of the CFR 650 by 50%.
Do not tow behind a truck or other
type of vehicle.
The CFR 650 is designed for off
road use only.
Do not transport on public roads
with bales in the processor tub.
Do not transport on public roads
with a bale loaded on the forks.
Check with local traffic regulations
to transport on public roads.
Stay away from overhead power
l i n e s
w h e n t r a n s p o r t i n g
equipment. Electrocution can
occur without contacting power
lines.
Do not allow any person to ride
on the tractor or CFR 650. Falling
off can result in serious injury or
death.
Keep the Axle U-Bolts Tight.
Injury could result if axles come
out.
Torque the axle u-bolts to 250 lb-
ft (339 Nm) to ensure the axles do
not slide out of the frame.
Maximum axle extension is 14"
(355 mm).
Page 2-1