Section 1 - Safety
DO NOT CONTACT ROTATING DRIVELINE
Contact with rotating driveline will cause serious injury or death.
Keep all driveline guards in place.
Securely attach drivelines at both ends.
Check that the driveline guards turn freely on the driveline.
DO NOT OPERATE WITH SHIELDS MISSING
Stop engine and ensure the PTO driveline is stopped before
working on driveline
DO NOT CONTACT ROTATING FLAILS
Contact with moving parts can cause serious injury or death.
Keep hands out of the cutting area and processor tub when the
flail drum is rotating.
Always disengage power takeoff, set park brake, lower loader forks
to the ground, shut off tractor engine, remove key, and wait for
PTO to stop turning before unplugging by hand or servicing.
Stay out of the processor tub when the PTO is connected to the
tractor.
Keep guards in place and in good condition.
DO NOT ENTER TUB WHILE PARTS ARE ROTATING
- With a bale in the tub
- Without a bale in the tub
Before entering the tub
- Turn off the tractor and remove the key.
- Wait for rotating parts to stop
The bale is unstable and may cause entrapment.
Contact with the moving feed mechanism or rotating flail drum will
cause serious injury or death.
Page 1-5
Summary of Contents for Bale Pro CFR650
