Trouble-shooting
Predator SS Turntable Stretch Wrapper Operation Manual
Highlight Industries, Inc. ● 2694 Prairie S
W, Wyoming
, Mi 49519 ● 1
-800-531-2465
40
Problem
Possible Cause
Possible Solution
The machine
does not power
up. (INFO
screen is blank)
The machine is not plugged in.
Plug the machine into a 120VAC,
20A outlet.
The Main Disconnect is turned
off.
Turn the Main Disconnect on.
A fuse is blown.
Replace the fuse(s).
The power supply has
malfunctioned.
Ensure fuses F6 and F7 are not
blown. Replace the power supply
(transformer card).
Power to the machine is not
correct
Use a voltmeter to check that the
machine is receiving 120VAC.
The INFO
display shows
E0
The Emergency Stop button is
pressed.
Turn the breaker back on, or
replace if necessary.
The film carriage foot safety
switch is tripped.
Remove any obstructions and
check that the switch is working
properly.
The electrical enclosure door
switch is open.
Ensure the door is closed and
that the safety switch is made.
The INFO
display is
flashing ‘
- -
‘
The power supply has
malfunctioned.
Ensure fuses F6 and F7 are not
blown. Replace the power supply
(transformer card).
The carriage raised/lowered limit
switches are both tripped.
Ensure there are no obstructions
and that the switches are working
properly.
Power Problems
