Trouble-shooting
Predator SS Turntable Stretch Wrapper Operation Manual
Highlight Industries, Inc. ● 2694 Prairie S
W, Wyoming
, Mi 49519 ● 1
-800-531-2465
41
Problem
Possible Cause
Possible Solution
The turntable
does not rotate
manually.
The Start Button was not pressed.
The Start button needs to be
pressed at the same time as the
turntable job button to activate
manual mode.
The Turntable speed
potentiometer is not set high
enough.
Adjust the turntable speed
towards 100%.
The turntable is mechanically
restricted.
Check the condition of the motor,
chain, and rollers under the
turntable. Replace as necessary.
The turntable speed
potentiometer has failed.
Use a multi-meter to check the
resistance of the potentiometer.
A fuse on the microcontroller card
has blown.
Check fuses and replace as
needed.
The motor is not wired correctly.
Check wiring to the motor and
replace as necessary.
The turntable
does not stop at
home.
The Turntable Home proximity
switch is malfunctioning.
Check the wiring to the proximity
switch and that it is adjusted
properly (only 8mm sensing
range). Replace as necessary.
Turntable Problems
