Highland HIO60MP, Instruction Manual

Page: 9 / 18

8
If the time remaining is less than 1 hour it will be shown in minutes and seconds (e.g.
9’14
, indicates 9 minutes and
14 seconds remaining).
A acoustic alarm sounds for 1 minute at the end of the set time. It can be muted by pressing any button. At the same
time, the display shows the message “
END OF TIMER
”.
To reset the timer press the knob C and turn it to change the timer duration.
If other programming parameters are set as well as the timer, the display highlights both. In any case the oven will carry
out its countdown with an acoustic signal at the end.
The timer can be activated even after selecting a cooking function from the self cooking menu: the setting modes are the
same as those described above.
Instant start of cooking with set duration
To cook for 30 minutes at 200 °C. With the oven on, select a cooking mode from the “self cooking” menu then select
“
duration
”. Confirm by pressing the knob C.
Then set the required cooking duration (30 minutes in the example) and in any case from a minimum of 1 minute to a
maximum of 9 hours and 59 minutes. After confirming, the display shows the cooking end time. Cooking starts after
confirming again (cooking will start automatically after 15 seconds even without confirming). By turning the knob C
the temperature can now be increased or decreased from a min. of 50 °C to a max. of 270 °C (200 °C in the example)
in steps of 5°.
NOTE : For all the functions, except defrost, grill and turbo grill, after having confirmed the cooking duration, and when
it is at least 15 minutes, the programme asks if the last 5 minutes of cooking are to be used with the grilling function.
This additional function is suitable for browning food.
A - preheating stage
(The set parameters can always be corrected with the same operations)
The display now shows the message “
PREHEATING
” together with the Cooking Mode Name, e.g. “
MULTI POWER
”,
as well as the set duration and current time.
The thermometer with mercury column rising (
) indicates that the oven is becoming hotter.
The display starts the countdown only after the required temperature is reached (except in grill functions, where the
countdown begins immediately), when two series of three sounds will be heard.
B - cooking stage
Place food in the oven.
The display now shows the message “
DURATION
” together with the Cooking Mode Name, e.g. “
MULTI POWER
”,
as well as the current time and the countdown which indicates the residual cooking time.
C - end of cooking
An acoustic alarm sounds for 1 minute at the end of the set time. It can be muted by pressing any button. At the same
time the display shows the message “
COOKING END
”.
The oven automatically switches off the heating, and the inside lamps remain on for about 15 minutes for checking
cooking. However the temperature will remain high for several minutes.
To continue cooking manually, just press the knob C and follow the procedures as described above in the Self Cooking
section.
To end everything, turn knob A to the off position.
It is possible to return to the previous menu screen at any time by selecting “Back” using knob C.
Delayed start of cooking with set duration
Set the cooking duration and the end of cooking time. Assuming the time is 8:00h and cooking is for 30 minutes ending
at 13:00h . After setting the duration and cooking mode as described in the previous section, select “
COOKING END
”
and confirm by pressing the knob C. Select the cooking end time (13:00h in the example) and confirm.
(After about 13 seconds the oven confirms in any case, even if the user does not confirm.)
The oven is now programmed and in standby mode.
The display shows:
0h30 / 13:00
alternatively the display indicates that their meaning is respectively
DURATION / COOKING END TIME
The set parameters, mode, temperature and times can always be corrected by selecting “Back” using knob C.
Cooking stage:
On reaching the cooking stage the oven behaves as in point B of the previous section.
The cooking duration countdown starts immediately, and not after the required temperature has been reached. This is
because it assumes that the food has already been placed in the oven at the moment of programming. The preheating
time is included in the cooking duration.