Highland HIO60MP, Instruction Manual, Page: 8 / 18

7
en
Important: Highland has designed the oven opening to protect hands as much as possible. However, the grill heating
element is still very hot when in use; be careful not to touch it accidentally when handling food to be grilled.
The preset power level is 60% max. power and does not provide for oven preheating.
Turbo grill cooking
The grill heating element at the top of the oven and the fan are activated. It combines one-way heat radiation with
forced air circulation inside the oven. This prevents burning the surface of the food and increases penetration of the
heat. Excellent results are obtained using the turbo grill for mixed meat and vegetable kebabs, sausages, spare-ribs and
lamb chops, broiled chicken, quail with sage, pork fillets, etc.
The preset power level is 60% max. power and does not provide for oven preheating.
Pyrolytic automatic cleaning
The PYROLYTIC self-cleaning function turns oven cleaning into a quick, easy and instant procedure. The temperature
reached in the cooking compartment, 480 °C, carbonises all food and fat residue. During this process, some particles of
residue may glow; this is a normal phenomenon due to instantaneous combustion.
The activation of this function by means of knob A ensures that, from that point at which a temperature of 330 °C is
reached and (after reaching the maximum temperature) until the oven temperature drops under 180°, the oven door
is locked and cannot therefore be opened. This situation is indicated by the padlock icon lighting up.
Furthermore, during heating, the “P” icon also lights up.
Before cleaning:
1. Do not leave anything inside the oven; remove all accessories such as drip-trays, racks, runners, telescopic guides,
etc. In fact, as well as hindering the correct circulation of heat on all the walls, these could also be damaged by the
high temperature.
2. Remove food residues using a moist sponge; never use detergents or any other specific cleaning product.
3. Do not obstruct the circulation of air in the area in front of the oven.
Above all, do not leave anything on the door handle.
During “Pyrolytic” automatic cleaning the surfaces can become very hot. Keep children away.
Any obscuring of the LCD display during the Oven Cleaning - Pyrolysis process is normal and not a cause for concern.
It is a precautionary display protection feature, caused by the high temperatures in use. This obscuring may last for
several tens of minutes; during this period the latter two indicator lights will provide all necessary information relating to
the process as it is running (P) and the door lock status (padlock).
N.B.: Any obscuring of the LCD display during Cooking processes may be caused by a fault in the oven cooling system,
which activates a protection feature (indicated by the flashing P symbol). If this situation arises, switch off the oven and
leave it to cool. If the problem persists, contact our After-Sales Service.
Cooling fan
In order to reduce the temperature at the door, control panel and sides, the Highland oven is equipped with a cooling
fan which is automatically activated when the oven is hot. When the fan is on, air blows from the front of the oven
between the front panel and oven door; special attention has paid to ensure that the exiting air does not disturb the
kitchen environment and that noise is kept to a minimum.
To protect kitchen units, the fan stays on after cooking until the oven has cooled down sufficiently.
Programming cooking time
This enables a cooking mode to be programmed with the required times and temperature.
The possibilities are:
- timer: countdown of a fixed time, without effects on start and end of cooking;
- duration: instant start of cooking with set duration;
- cooking end: delayed start of cooking with set duration.
Setting the Timer
The Timer is separate from any other oven function and is used to set a required time after which an acoustic signal
sounds, without affecting the cooking processes.
Switch the oven on, press the knob C once, the icon
starts flashing, and the display will show the message “
SET TIMER
”.
Select “
TIMER
” and confirm by pressing the same knob. Then set the required time in 30-second steps (and one-minute
steps for a time of more than 1 hour) up to a max. of 9 hours and 59 minutes. Confirm by pressing the knob C.
(After 15 seconds the oven confirms in any case, even if the user does not confirm).
The display will now show the message “
TIMER
” and starts the countdown.
If the time remaining is more than 1 hour it will be shown in hours and minutes (e.g.
1h:03
, indicates 1 hour and
3 minutes remaining).