High Lifter PGL-KIT-RZRT, Manual, Page: 9 / 34

PGL-KIT-RZRT 9
e. Remove the cotter pin and loosen the front wheel hub castle nut. (27mm) Remove the nut and cone
washers, and then remove the hub.
f.
Remove the front brake rotor assembly.
g. Disconnect the tie rod. (18mm)
h.
Remove upper ball joint pinch bolt from the knuckle (15mm). Then remove the lower ball joint nut from the
knuckle. (18mm)
i.
Remove the knuckle and retain the factory bolts & nuts. They will be re-used later in the install process.