PGL-KIT-RZRT
11
f.
Secure with the factory bolt and nut. (18mm)[90 ft lbs]
Note: You may need to clean powder coating from the holes
g.
Insert the axle into the backing plate.
h.
Place the upper ball joint into the portal box as
sembly’s upper pinch bolt mount.
Note: You may need to clean powder coating from the holes.
-
If you are using stock or non forward raked arms, then insert the factory bolt and fasten with the factory
nut. Torque front ball joint pinch bolt (15mm)[50 ft lbs]
-
If you are using forward raked arms, then insert the supplied
10mm x 1.25 x 55mm bolt
and fasten with
a
10mm x 1.25 lock nut
. This bolt will provide more clearance. Torque front ball joint pinch bolt
(15mm)[50 ft lbs]
Summary of Contents for PGL-KIT-RZRT
Page 1: ...PGL KIT RZRT 1...
Page 6: ...PGL KIT RZRT 6 PARTS DIAGRAM...
Page 7: ...PGL KIT RZRT 7...