High End Systems StudioPix, User Manual

Page: 78 / 118

CHAPTER 9
Image Graphics Control
64 StudioPix™ Pixelation Luminaire User Manual
Image Transition
In Standard and Extended protocol, you can choose between several Transition Mode options
and use the Transition Speed parameter to adjust the option.
Transition Mode
Transition Default DMX Value: 0 = Normal playback with no transition
Transition Mode controls the pixel transition of a movie file from frame to frame on the image
layer. By default, frames will snap from one to the next, however different frame transitions can
be selected to create unique playback of image files.
Transition Speed
The Transition Speed parameter will adjust the speed of the selected transition mode as the file
changes from frame to frame.
Transition Speed Default DMX Value: 128 (50%) = Normal playback speed
The following table describes the Transition Mode options available and the type of adjustment
you can make to the option using the Transition Speed parameter.
Note: SHOWPIX and StudioPix fixtures also allow dynamic transitions
between the image layers when adjusting the Global Transition
parameter (see
Global Transition on page 47).
DMX
Value
Transition
Mode
Description Transition Speed Function
0 Normal Normal playback No effect
1 Snap/Fade
Snaps from the current frame to the next
frame and then fades out the first frame Adjusts the duration of the fade
between frames
2 Fade/Snap
Fades out the current frame and then
snaps to the next frame Adjusts the duration of the fade
between frames
3 Strobe Flashing crossfade from frame to frame
Adjusts the speed of the fade between
frames
4 Trails
Retains a partial fade of the current frame
added to the new frame Adjusts the amount of decay from the
previous frame