High End Systems StudioPix, User Manual

Page: 113 / 118

StudioPix™ Pixelation Luminaire User Manual 99
Appendix B:
Important Safety Information
Warning: For Continued Protection Against Fire
1. This equipment is designed for use with specified LED only. Use of any other type LED may
be hazardous and may void the warranty.
2. Do not mount on a flammable surface.
3. Maintain minimum distance of 1.0 meter (.9 feet) from combustible materials.
4. Replace fuses only with the specified type and rating.
5. Observe minimum distance to lighted objects of 1 meter (3.9 feet).
6. This equipment for connection to branch circuit having a maximum overload protection of
20 A.
Warning: For Continued Protection Against Electric Shock
1. If this equipment was received without a line cord plug, attach the appropriate line cord
plug according to the following code:
• brown–live
• blue–neutral
• green/yellow–earth
2. In the United Kingdom, the colours of the cores in the mains lead of this equipment may not
correspond with the coloured markings identifying the terminals in your plug, proceed as
follows:
• the core which is coloured green and yellow must be connected to the terminal in the plug
which is marked with the letter E or by the earth symbol , or coloured green or green and
yellow.
• the core which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black.
• the core which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.
3. Class I equipment. This equipment must be earthed.
4. Equipment suitable for dry locations only. Do not expose this equipment to rain or moisture.
5. Disconnect power before re-lamping or servicing.
6. Refer servicing to qualified personnel
Warning: For Continued Protection Against Injury To Persons
1. Use secondary safety cable when mounting this fixture.
2. Equipment surfaces may reach temperatures up to 160° C (320° F). Allow a minimum of 10
minutes for cooling before handling.