High End Systems DL.2, User Manual

Page: 185 / 252

CHAPTER 16
Restoring the System
DL.2 User Manual 165
Performing the System Restore
Follow steps 1–8 for a partial system restore. Continue through step 12 for a full system
restore.
1. Position your fixture so that you can view the DL.2 menu on the LCD display.
2. Plug your USB CD or DVD drive, keyboard, and mouse (optional) into one of the external
USB ports on the DL.2. If necessary, you may need to use a USB hub, although this should
only be a requirement if you wish to use a mouse.
3. Power on or reboot the DL.2. When you see “Hit any key to boot from CD…”, press a key on
your keyboard.
4. Allow the System Restore menu to load. Depending on the speed of your USB drive, it will
take between 3-5 minutes load. During this time, a number of small windows will appear
and disappear. Wait until you see a full-screen menu titled DL.2 System Restore Menu.
5. Using the <Tab> key on your keyboard or using your mouse, select the type of restore you
wish to perform.