High End Systems DL.2, User Manual

Page: 129 / 252

CHAPTER 11
Effect Mode Options Descriptions
DL.2 User Manual 109
Horizontal Mirror
Effect Mode parameter DMX value = 40
This option splits the image vertically and mirrors the image alongside it’s original.
Modifier 1: The default DMX value of 128 (50%) sets the mirror center point at the center of
the screen. Values below the midpoint move the mirror center point toward the left as you
approach 0. Values above the midpoint move the mirror center point toward the right as you
approach 255 (100%).
Modifier 2: Not Used
Modifier 3: Not Used.
Magnifying Lens
Effect Mode parameter DMX value = 36
This option applies spherical overlay that magnifies a portion of the texture to create a virtual
convex lens effect over a portion of the image. You can adjust the size of the lens and move it
over different areas of the image.
Modifier 1: Controls the horizontal position of the lens’ centerpoint from 0=left edge to 255
(100%) = right edge of output.
Modifier 2: Controls the vertical position of the lens’ centerpoint from 0=top edge to 255
(100%) = bottom edge of output.
Modifier 3: Controls the size of the lens from 0=smallest to 255 (100%) = largest.
Magnifying Lens 2
Effect Mode parameter DMX value = 37
This option applies spherical overlay that magnifies a portion of the texture to create a doubled
virtual convex lens over a portion of the image. You can adjust the size of the lens and move it
over different areas of the image.
Modifier 1: Controls the horizontal position of the lens’ centerpoint from 0=left edge to 255
(100%) = right edge of output.
Modifier 2: Controls the vertical position of the lens’ centerpoint from 0=top edge to 255
(100%) = bottom edge of output.
Modifier 3: Controls the size of the lens from 0=smallest to 255 (100%) = largest.
Tip: Zooming in with this lens option creates an additional effect.
Object Effect Global Effect
Object Effect Global Effect
Object Effect Global Effect