Box spring Hilo
OPERATING INSTRUCTIONS
page 13 of 62
II. OPERATING INSTRUCTIONS
2.1 Assembly of the Hilo box-spring bed
1.
Unpack the metal frame and the upholstered bed frame and place them next to each other.
Please make sure that the head and foot end of the metal frame and the upholstered frame
are in the same direction. Put the metal frame in its highest position by using the hand switch.
Figure 2.1: Unpacking the metal frame and upholstered frame
Attention: be careful when unpacking.
Do not use a cutter, this can cause damage.
Use cardboard or other soft material to prevent damage.
2.
Put the upholstered frame on the metal frame and screw them with 4 screws.
Figure 2.2: Fixation of the upholstered frame to the metal frame
Summary of Contents for Hilo
Page 2: ...Box spring Hilo OPERATING INSTRUCTIONS page 2 of 62 ACTIVATION SUMMARY...
Page 3: ...Box spring Hilo OPERATING INSTRUCTIONS page 3 of 62 ASSEMBLY SUMMARY...
Page 34: ...Box spring Hilo TECHNICAL MANUAL page 34 of 62 TECHNICAL MANUAL...
Page 61: ...Box spring Hilo APPENDIX page 61 of 62 APPENDIX 3 TRAINING CERTIFICATE...
