© 2020 HI-POD INC.
(PAGE 44)
button light up on the remote
-
so the client believes everything is
connected correctly
-
but then they have no control over zoom and
record functions.
This means you only have a half
-
connection of the
cable into remote
-
enough to receive power, but not enough to
communicate signals back and forth. Correct this by adjusting the
placement of the white strain relief back onto the cable head, and
make sure it is fully connected. Then everything will start working
.
Complete this portion of the setup by sliding the gray plastic 'grip' on
the arm of the remote mount directly behind the end of the cable head.
This acts as
additional strain relief.
(1)
(2)
