© 2020 HI-POD INC.
(PAGE 41)
Finish Remote Setup
In the image below you'll see a red arrow pointing to a port on the
remote control. This is where you will plug in the cable on the bundle
(top end of this cable has
the yellow tag which plugged into camera).
The cable head looks like this (right).
Pay special attention to the white piece
added to the cable head. This is a strain
relief that we have made with a 3D
printer. It fits into the gap around the
cable port
that's
inside the remote and
prevents the tip of the cable from
wiggling or
breaking inside when filming.
