© 2020 HI-POD INC.
(PAGE 29)
USB Cable
Inside of the hand
-
strap on
the camera you'll find a
small USB cable. This is
used to transfer data to a
computer after filming,
and it also charges the
small internal battery
included with the camera.
We'll discuss battery setup in more detail, but be aware
that the small
internal battery will need some amount of charge in it so that the
camera will turn on, but you do not want the small battery to be used
as the default power source because it will die in 20
-
30mins (more on
that in a later section).
Mount the
camera by
pulling back the
lever on the
Quick Release
Plate, and
inserting the
adapter on the
bottom of the
camera into
the plate
assembly. Tilt the camera in forward first, then snap the back in. The
lever should close behind the camera to secure it in place.
