© 2020 HI-POD INC.
(PAGE
37
)
Make sure to confirm the correct battery (external USB) is set as the
default power source for the camera. See how to do this below.
You'll need to check the LCD window attached to the camera.
If you
see an icon that shows a battery
-
fully charged, half charged, or about
to die (like in the image below) you are drawing power from the small
battery inside of the camera.
This is NOT what you want.
If your external battery is already connected (per instructions above)
you need to 'click' the battery on to activate the power transfer.
Sometimes the batteries don't automatically turn on (often they do
-
but not always). When the big USB battery takes over, the battery icon
on the camera LCD will disappear.
This is what you want
.
