HHP Adaptus Image Kiosk TT8870, Programming Manual

Page: 46 / 149

5 - 4 Image Kiosk™ TT8870 Programming Guide
Linear Symbologies
Codabar Check Character
Codabar check characters are created using different “modulos.” You can
program the imager to read only Codabar bar codes with Modulo 16 check
characters.
Default = No Check Character.
No Check Character indicates that the imager reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate and Transmit , the imager will only read
Codabar bar codes printed with a check character, and will transmit this
character at the end of the scanned data.
When Check Character is set to Validate, but Don’t Transmit , the unit will only
read Codabar bar codes printed
with
a check character, but will not transmit the
check character with the scanned data.
* No Check Character
Validate Modulo 16
and Transmit
Validate Modulo 16, but
Don’t Transmit