HHP Adaptus Image Kiosk TT8870, Programming Manual

Page: 126 / 149

8 - 18 Image Kiosk™ TT8870 Programming Guide
Image Ship - IMGSHP
An image is taken whenever the trigger of the TT8870 is pressed, or when the
Image Snap (IMGSNP) command is processed. The last image is always stored
in memory. You may “ship” the image by using the IMGSHP command.
IMGSHP Modifiers
The image ship command has many different modifiers that can be used to
change the look of the image output by the scanner. Modifiers affect the image
that is transmitted, but do not affect the image in memory. Modifiers always
begin with numbers and end with a letter (case insensitive). Any number of
modifiers may be appended to the IMGSHP command. For example, you can
use the following command to ship a bitmap image with gamma correction and
document image filtering:
IMGSHP8F75K26U
A - Infinity Filter: Enhances pictures taken from very long distances (greater
than 10 feet or 3 m).
0A Don't apply the infinity filter (default)
1A Apply the infinity filter
C - Compensation: Flattens the image to account for variations in illumination
across the image.
0C Compensation disabled (default)
1C Compensation enabled
D - Pixel Depth: Indicates the number of bits per pixel in the transmitted
image (KIM or BMP format only).
8D 8 bits per pixel, grayscale image (default)
1D 1 bit per pixel, black and white image
E - Edge Sharpen: Causes the transmitted image to be convolved with an
edge sharpening filter. Entering a 23E gives the sharpest edges, but also
increases noise in the image.
0E Don’t sharpen image
(default)
14E Apply edge sharpen for typical image
ne Apply edge sharpen using strength n (n = 1-24)
F - File Format: Indicates the desired format for the image.
0F KIM format
1F TIFF binary
2F TIFF binary group 4, compressed
3F TIFF grayscale
4F Uncompressed binary
5F Uncompressed grayscale
6F JPEG image (default)