HHP Adaptus Image Kiosk TT8870, Programming Manual

Page: 19 / 149

Image Kiosk™ TT8870 Programming Guide 2 - 3
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same
number of beeps will be applied to the beeper and LED in response to a good
read. For example, if you program this option to have five beeps, there will be
five beeps and five LED flashes in response to a good read. The beeps and LED
flashes are in sync with one another. To change the number of beeps, scan the
bar code below and then scan a digit (1-9) bar code and the
Save bar code on
the Programming Chart inside the back cover of this manual.
Default = One.
Reread Delay
This sets the time period before the imager can read the same bar code a second
time. Setting a reread delay protects against accidental rereads of the same bar
code. Longer delays are effective in minimizing accidental rereads at POS (point
of sale). Use shorter delays in applications where repetitive bar code scanning
is required.
Default = Medium.
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the inside
back cover, then scanning
Save
.
Number of Pulses
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms) Extra Long (2000 ms)
User-Specified Reread Delay