manualshive.com logo in svg

Hewlett Packard Enterprise FM 2072, Installation Manual, Page: 5 / 35

Share
Download
Hewlett Packard Enterprise FM 2072 Installation Manual Download Page 5

 

 

FM 3180 Installation Guide

 

5 

Introduction 

The HPE FM 3180 fabric module is a 48 port 25 GbE and 8 port 100 GbE fabric module in a 1U form 
factor that provides 2.0 Tbps Bandwidth, ideally suited for Datacenter top of rack deployments. 

The FM 3180 supports port level configuration of 48 10 GbE or 25 GbE SFP ports and eight 100 GbE 
QSFP28 ports. It provides superior low latency and power efficiency, while offering high reliability 
features such as redundant and hot swappable power supplies and fans in forward and reverse airflow 
configurations. 

Front panel view 

 

Back panel view 

 

The FM 3180 consists of the following front-panel network ports: 

•

 

48 SFP28 ports (1 - 48) which can be at 1x10 GbE or 1x25 GbE as Access ports. 

•

 

2 QSFP28 ports (49 and 50) that operate as 4x10 GbE or 4x25 GbE ports for Access ports. 

•

 

6 QSFP28 ports (51 - 56) that operate as 4x10 GbE or 4x25 GbE ports for Composable Fabric ports. 

Related Documentation 

In addition to this document, refer to the following documentation: 

•

 

HPE Composable Fabric 5.0 Release Notes 

•

 

HPE Composable Fabric 5.0 Support Matrix

 which contains version-specific software and hardware support 

information, including cable and transceiver support information.

 

•

 

HPE Composable Fabric Manager 5.0 Installation Guide 

•

 

HPE Composable Fabric Module 5.0 Administrator Guide using Linux and CLI. 

•

 

HPE Composable Fabric 5.0 FM 3032Q Fabric Module Installation Guide 

•

 

HPE Composable Fabric 5.0 FM 2072 Fabric Module Installation Guide 

•

 

HPE Composable Fabric Manager Online Help

 which is available while logged into the HPE Composable 

Fabric Manager UI 

Contacting HPE Networking Support 

You can open a support case by contacting the HPE Advanced Support Center at 1-800-633-3600. Note 
that customers will be asked to provide their Support Agreement ID (SAID) so that the support agent can 
provide the full level of support to which the customer is entitled and see the details of the equipment 
covered. Alternatively, the customer could provide the serial number of the device under support. 

You can also open a support case electronically through the HPE Support Center: 

www.hpe.com/support/hpesc

 

Note: To log a case directly in HPE Support Center you will need both an HPE Passport account and a 
valid Service Agreement ID (SAID). In May 2019, legacy Plexxi customers will receive HPE SAID 
numbers for their existing Plexxi service agreements (see the “Support Service Contract Migration” 
section in this document). 

Summary of Contents for FM 2072




































Reviews:

No comments