EN
55/83
ROTINA 380 R Robotic
(a)
(b)
(c)
(d)
(e)
(d)
(a)
(b)
(e)
(c)
(f)
(g)
(e)
ROTINA 380 RC Robotic
(e)
(f)
(a)
(b)
(c)
(d)
(d)
(a)
(b)
(e)
(c)
(g)
(e)
Open the lid.
Screw out the four screws (a) and remove the motor cover (b).
Take out the bellows (e).
Remove the three screws (c) and spacer sleeves (d).
Insert the bellows (e). The cable of the speed sensor (g) must be in the recess of the bellows. Push the lower
sealing lip of the bellows under the edge of the centrifuging chamber (f), and push the upper sealing lip of the
bellows over the edge of the centrifuging chamber (f).
The edge of the centrifuging chamber (f) must be between the two sealing lips of the bellows.
Turn the motor cover (b) over and fasten to the motor with the four screws (a).
The transport securing device is installed in the opposite order.
