Hesai PandarXT-16 User Manual Download | Manualshive

Page: 82 / 83

background image

-

80

-

Appendix V

Legal Notice

Copyright 2021 by Hesai Technology. All rights reserved. Use or reproduction of this manual in parts or its entirety without the authorization of
Hesai is prohibited.

Hesai Technology makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties, merchantability, or fitness for any particular purpose. Further, Hesai Technology reserves the right to revise this
publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

HESAI and HESAI logo are registered trademarks of Hesai Technology. All other trademarks, service marks, and company names in this manual
or on Hesai's official website are properties of their respective owners.

The software included in this product contains copyright that is registered under Hesai Technology. Any third party is not permitted, except as
expressly permitted by licensor or expressly required by applicable law, to decompile, reverse engineer, disassemble, modify, rent, lease, loan,
distribute, sublicense, create derivative works based on the whole or any part of the software.

Hesai Product Warranty Service Manual is on the Warranty Policy page of Hesai's official website:

https://www.hesaitech.com/en/legal/warranty

«
...
80
81
82
83
»

Summary of Contents for PandarXT-16




















































































Reviews:

No comments

Related manuals for PandarXT-16

Brand: Sangean Pages: 1

GMR 404 xHD Open Array and Pedestal

Brand: Garmin Pages: 6

Brand: Sirius Satellite Radio Pages: 36

Brand: Belkin Pages: 102

Brand: Skydio Pages: 7

Brand: TTI Technologies Pages: 14

Brand: Vertex Standard Pages: 146

Brand: Ericsson Pages: 16

Brand: Timex Pages: 19

Brand: Hyundai Pages: 15

Brand: SJ Pages: 43

Brand: Sangean Pages: 12

Brand: Medion Pages: 164

Brand: Medion Pages: 368

Brand: Grace Pages: 1

Brand: Roadstar Pages: 24

Brand: CTC Union Pages: 22

Brand: K40 ELECTRONICS Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands