-
25
-
2.3.1
Connection Box Interfaces
Figure 2.7 Connection Box (Front)
Figure 2.8 Connection Box (Back)
Port #
Port Name
Description
a
Standard Ethernet Port
RJ45, 100 Mbps Ethernet
b
Power Port
Connects to a DC power adapter
c
GPS Port
Connector
part number
: JST SM06B-SRSS-TB
Recommended connector for the external GPS module: JST SHR-06V-S-B
Voltage standard: RS232 Baud rate: 9600 bps
The GPS port pin numbers are 1 to 6 from left to right, defined as follows:
Pin #
Direction
Pin Description
Requirements
1
Input
PPS (pulse-per-second) signal for synchronization
3.3 V to 12 V Rising edge ≤500 ns
Recommended pulse width ≥1 ms
Cycle: 1 s (from rising edge to rising edge)
2
Output
Power for the external GPS module
5 V
3
Output
Ground for the external GPS module
-
4
Input
Receiving serial data from the external GPS module
RS232 level
5
Output
Ground for the external GPS module
-
6
-
Reserved
-
Summary of Contents for PandarXT-16
