-
35
-
3.1.3
Point Cloud Data Analysis
Take Channel 5 in Block 2 as an example:
■ Analyze the vertical angle of a data point
The designed vertical angle of Channel 5 is 7°, according to Appendix I (Channel Distribution)
Notes
·
The accurate vertical angle is recorded in this LiDAR's unit's angle correction file, see Section 1.3 (Channel Distribution).
·
0° is the horizontal direction; define upward as positive (see Figure 1.5).
·
Channel # counts from 1, top to bottom.
■ Analyze the horizontal angle of a data point
Y-axis is the 0° position; define clockwise in the top view as positive (see Figure 1.4).
Horizontal angle = ①
+
②
+
③
① Rotor reference angle during the current round of firing
In the Azimuth field of Block 2.
①
Horizontal angle offset of the channel
The designed offset for Channel 5 is 0°, according to Appendix I (Channel Distribution Table).
The accurate horizontal angle offset is recorded in this LiDAR's unit's angle correction file, see Section 1.3 (Channel Distribution).
③ Firing time angular offset of the channel = ④ * ⑤
Summary of Contents for PandarXT-16
