If laser based angle range method is selected, users can see a table as in Figure 4.4. The start and end angles of each laser can be
con
fi
gured individually.
Users can edit the start and end angles by
fi
rst downloading the angle range con
fi
guration file and then upload the edited con
fi
guration
fi
le.
Please click “Save” to apply your settings.
NOTE
1) Use LiDAR Based Method if the same angle range is expected on all 20 channels. Outside the speci
fi
ed range, no laser will be
fi
ring and
no data will be generated.
2) If Laser Based Method is chosen and the angle range varies channel by channel, there will be no data generated only outside the union of
all speci
fi
ed angle ranges.
Figure 4.4 Angle Range Page-Laser Based
Laser Based
- 2 6 -
