background image

 

 

HERZ ETKF+

 

Page 4 

antenna symbol 

(

 ) 

ETKF+ components lost 

the batteries of taught-in 
ETKF+ components. 

Quickly flashing 
Antenna symbol 

(

“Duty cycle” limit reached 

The device can resume radio 
communication after a waiting 
time of approx. one hour 

CAL  
 

Routine descaling 
is active 

Automatic function 

 

Information about radio operation 

Radio transmission is performed on a non-exclusive transmission path, which means that there is a 
possibility of interference occurring. Interference can also be caused by switching operations, 
electrical motors or defective electrical devices.  

The range of transmission within buildings can differ greatly from that available in the open 
air. Besides the transmitting power and the reception characteristics of the receiver, 
environmental factors such as humidity in the vicinity have an important role to play, as do 
on-site structural, screening conditions. 

 

 

Disposal and Safty instractions 

Do not dispose of the device with regular domestic waste!  
Electronic equipment must be disposed of at local collection points for waste electronic 
equipment in compliance with local directives governing waste electrical and electronic 
equipment.  
 
The CE sign is a free trade sign addressed exclusively to the authorities and does not 
warrant any properties.

  

 

For technical support please contact our service agency. 

 

The devices concerned are not intended for children and must not be used as toys.  
Do not leave packaging material lying around, as children might be tempted to play with it, 
which is extremely dangerous.  
 
Do not open the device: it does not contain any components that need to be serviced by the 
user. In the event of an error, please return the device to our service department.

  

 

Using the device for any purpose other than that described  in this brief instruction does not 
fall within the  scope of intended use and shall invalidate any warranty  or liability. This also 
applies to any conversion or modification work. The device is intended for private use only.

 

 

 

Accessories

 

 

8251 

02 window  contact for energy saving thermostatic head ETKF+ 

8251 

03 wall the for energy saving thermostatic head ETKF+ 

6350

 03 Thermostats Adapter Ring for T&A Thermostatic Valves (threaded connection M28 x  

1,5)  

6357

 11 Thermostats Adapter Ring „H“ (threaded connection M30 x 1,5)  

6351

 01 Thermostats Adapter Ring for Caleffi Thermostatic Valves (threaded connection M30 x 

1,5)  

6362 

00 Thermostats Adapter Ring „D“ for Danfoss Valvs (Ø 23)  

6362 

01 Thermostats Adapter Ring „D“ for Danfoss screw valvs (threaded connection M20 x 1 old 

version)  

6362

 11 Thermostats Adapter Ring „D“ for Danfoss screw valvs (threaded connection M23,5 x 1,5 

current version) 

 
 
 

 
 

Summary of Contents for 8251















Reviews: