TW-800R-SLNX
18
⚫
[Data length type] Ethernet output data type setting
The data size varies depending on the set values.
For details of each data format, refer to “7-2.Communication specifications” described later.
Setting value
Contents
Short
Generates short data. (Data size: 19byte)
Long
Generates long data. (Data size: 43byte)
Default:
Short
⚫
[Output at pressing test switch] Output setting for when the test switch is pressed
Set whether or not to generate signals from the external output cable Output 1(red) or Output 2(red/white)
when the test switch of the transmitter is pressed.
Applies to external output cable Output 1(red) and Output 2(red/white).
Setting value
Contents
OFF
Does not generate an external output.
ON
Generates an external output.
Default:
OFF
*
Note
・
When the signal from another transmitter is received while buzzer of receiver sounds, the buzzer sounds for
transmitters received later is not performed. LAN output is performed respectively.
・
When the receiver cannot generate an output through LAN (e.g. not connected to an external device), it holds
100 items of data from the transmitters. When more than 100 items of data are received, any data received after
that will be discarded. The moment connection is made to an external device, the receiver generates outputs of
all stored data.
