TW-800R-SLNX
13
6-3. Settings With Web Server
The following items can be viewed or changed by using the Web server functions of the receiver.
Item
Contents
System Information
Viewing the model number, firmware version, serial number and MAC address.
Device Setup
Output condition setting, output time setting, double count prevention time
setting, Ethernet output data type setting, output settings when the test switch
is pressed, and viewing of the transmitter ID being paired.
Network Setup
Setting the IP address, subnet mask, default gateway and communication
method.
Account Setup
Setting the username and password for logging in to the Web server.
*Pair the receiver and transmitter before executing Device Setup.
6-3-1. Connecting to Web server
--- Factory default setting ---
IP address
192.168.3.102
Port No.
50001
*The port No. cannot be changed.
①
Change your PC's network settings to make the PC use the same network as the receiver.
Example)
IP address
192.168.3.100
/ Subnet Mask
255.255.255.0
②
Start up the web browser on the PC and enter the receiver’s IP address in the address bar.
Use a web browser of Google Chrome, IE (Internet Explorer) 11 or higher, Microsoft Edge, etc.
*The terminal with iOS cannot connect to the Web server.
③
When accessing the receiver, entry of a username and password is requested.
When logging in for the first time, enter the default username and password.
--- Default password ---
User name
Admin
Password
Herutu001
Enter the receiver’s IP address in the address bar of the Web browser.
