21D-265C
17
Function settings
5-5. Setting the digit-number
Command [3]
Set the digit-number. Set it to fit on the digit-number of Indicator unit.
①
Select [3] key and press [ENT] key, and Digit-number setting screen appears.
If there is no need to change the setting contents, press [ENT] key to get back to the
Command selection screen.
②
Press [▲][▼]keys to select digit No.(5-digit/4-digit).
③
Here, press [ENT] to set the type, and Command selection screen comes back.
5-6. Setting the tact precision
Command [4]
①
Press [4] key, and Digit-number setting screen appears.
If there is no need to change the setting contents, press [ENT] key to get back to the
Command selection screen.
②
Press[▲][▼]key to select tact precision (0.1sec/0.01sec).
③
Here, press [ENT] to set the tact precision, and Command selection screen comes back.
*Once the tact precision is changed, the tact unit, which is set at present, will be changed.
Therefore, if changed, be sure to reset the tact and tact reserve data.
If tact precision is changed from 1/10 into 1/100, the tact will become 1/10.
If changed from 1/100 into 1/10, the tact will become 10-fold value.
Ｄｉｇｉｔ
＞５
ｎｕｍｂｅｒ
４
[Digit-number setting screen]
Selective digit-no:4-digit or 5-digit
Ｔａｃｔ
＞０．１
ｐｒｅｃｉｓｉｏｎ
０．０１
[Tact precision setting screen]
Selective tact precision:0.1sec or 0.01sec
