21D-265C
13
Function settings
5. Function settings
Function setting of this machine is already done depending on the customers
’ needs
before shipment; however, if you need to change about the following contents, proceed as
follows. If those descriptions are unwanted, see the Basic operation.
5-1. Function settings
①
Turn on the power switch with [F1] being pressed.
Keep pressing [F1] key for about 2 seconds until after [Command selection screen]
appears and buzzer sounds.
Ｎａｍｅ：２１Ｄ－２６５Ｃ－Ｅ
Ｖｅｒ：＊．＊＊－＊＊＊＊＊＊
[Opening screen]
↓
After about 2 seconds, Command selection screen appears.
＊＊
Ｃｏｍｍａｎｄ
＊＊
（０－１２）
[ ]
[Command
selection
screen]
②
You may set the following contents in command selection screen.
Enter numeric value for the item to be changed, and press [ENT]key.
Command
Contents
Setting range
[0]
Sets the equipment No.
1-99
[1]
Sets the wireless channel.
0-40
[2]
Sets the type.
0-6
[3]
Sets the digit-number.
4/5
[4]
Sets the tact precision.
0.1/0.01
[5]
Sets with or without tact reserve function.
No/Yes
[6]
Sets with or without working hours
No/Yes
[7]
Sets the password
0000-9999
[8]
Sets the pre-scale
0/1/2
[9]
With or without Advancement judging
function
No/Yes
[10]
Sets the transmit mode
Continuous/Intermittent
[11]
Sets the display latch
No/Yes
[12]
Stop to calculate at PLAN=TARGET
No/Yes
