Operating Instruction
95990021
Operating Instruction
95990021
47
www.herthundbuss.com 46
EN
EN
This display is shown if the single diagnosis
has been performed successfully.
This display is shown if the single diagnosis
has failed.
Diagnostics: you can read in the next sensor
directly here. The device automatically
jumps to this button.
New sensor: you can switch directly to the
“New sensor” function here. The function is
used for sensor programming.
See also page 48.
2.4.3 Multi-sensor (multiple read-out)
Use the arrow buttons to navigate.
Select “Multi-diagnosis”.
Press “OK” to confirm.
The multi-diagnosis can be performed.
Select the desired tyre positioning.
Press “OK” to confirm.
The sensor is now read in.
The ID and the air pressure are now
displayed next to the tyre.
The device automatically jumps to the
next tyre.
Repeat the procedure as desired until all
tyres are read in.
Select the desired
follow-up function directly: diagnostics,
new sensor, tread depth, save.
Diagnostics:
the sensor is read in.
New sensor:
the sensor is programmed
from the device database
to the selected vehicle.
Tread depth:
the tread depth is measured.
Save:
creates a data set and
saves it in the device. This
can then be transferred to
a printer and shared with
the customer.
NOTE
If the device finds an already used
ID, the message “double ID found”
appears. This means that you have to
keep more distance from other source
sensors so that the device can easily
read in the desired sensor. It can,
however, also mean that you have
already programmed the sensor.
2.4.4 Input diagnostics
Corresponds to multi-diagnosis; however,
saved data sets are also saved as “input
diagnostics” here. This is used as evidence
for the end customer.
2.4.5 Output diagnostics
Corresponds to multi-diagnosis; however,
saved data sets are also saved as “output
diagnostics” here. This is used as evidence
for the end customer.
2.5 Programming | New sensor
Use the arrow buttons to navigate.
Select “New sensor”.
Press “OK” to confirm.
You are now in the “New sensor” function
menu for programming wheel sensors.
