![background image](http://html1.mh-extra.com/html/hero/ignitor-techno/ignitor-techno_manual_2126650046.webp)
42
CW- Clockwise ACW- Anticlockwise
(3) Adjusting nut (4) Brake joint pin
ü
X
(A) Cut-out not seated
(
B
) Cut-out seated
3
4
4
3
NOTE
If proper adjustment cannot be obtained by
this method, visit your Authorised Distributor
/Dealer.
Free play (2) should be 20-30 mm.
(1) Rear brake pedal (2) Free play: 20-30 mm
1
2
(3) Adjusting nut (4) Brake joint pin
CW- Clockwise; ACW- Anticlockwise
3
(A)
Decrease free play (
CW
)
4
A
(
B
)
Increase
free play (
ACW
)
B
•
If adjustment is necessary, turn the rear
brake adjusting nut (3).
•
Apply the brake several times and check
for free wheel rotation when released.
•
Make sure that the cut-out on the adjusting
nut is seated on the brake
joint
pin (4) afte
r
the final adjustment has been made.
(c) Rear brake
(Adjustment)
inspection
•
Park the vehicle on its main stand.
arrow aligns with the reference mark on full
application of the brake, the brake shoes
must be replaced.
Brake wear indicator inspection
When the brake is applied, an arrow (1), fixed
to the brake arm (2), moves towards a
reference mark (3) on the brake panel (4). If the
(Drum type)
NOTE
If proper adjustment cannot be obtained by
this method, visit your Authorised Distributor
/Dealer.
•
Measure the brake pedal (1) free play
moves before the brake starts to take hold.
Summary of Contents for IGNITOR TECHNO
Page 4: ......