HERO IGNITOR TECHNO, Manual, Page: 20 / 71

16
2. i3s Switch
There is an i3s switch provided to enable (2)
the rider for turning i3s mode “ON” or “OFF”
based on the traffic conditions.
•
Never hold electric starter switch continuously
more than 5 seconds as continuous cranking
of engine will drain the battery.
•
During electric or clutch start, the engine will
cut-off if engine reaches 900 rpm if the
relay is engaged for more than 5 seconds.
CAUTION
! !
Starting & Warm up the engine:
Start the engine and let it idle for 2-3
minutes.
Keep the i3s switch (1) to “OFF” position.
Turn the ignition key to “ON” position. The
i3s indicator (2) will glow on the speedometer
console for 2 seconds and turn “OFF”.
i3s (Idle stop start system)
(1) i3s switch
(2) i3s indicator
(b) Right handlebar controls
1. Electric starter switch
engaged in gear, press the clutch lever before
operating the starter switch. Release starter
switch after the engine has started.
Ensure starter switch ( ) is operated when the 1
vehicle is in neutral gear. If the vehicle is
1
(1) Starter switch (2) i3s switch
2
1
NOTE
Do not accelerate during starting when the
bystarter is “ON”.
2