32
•
Clean filters as specified in the maintenance
schedule.
•
Ensure to replace gasket with new one once
removed
NOTE
•
Reinstall the filter screen with the tapered
end facing inwards.
•
Fill the crankcase with clean engine oil as
per specification.
•
Remove centrifugal filter cover (7) & clean
the centrifugal filter (8) with non flammable
or high flash point solvent (kerosene).
•
Reinstall the centrifugal filter cover, right
crankcase cover (with dowel and gasket) &
kick starter pedal, rider foot rest, muffler and
connect the clutch cable.
(a) Air cleaner element inspection
Air cleaner
T
he air cleaner
element
is viscous type, it
should be
replaced
at regular intervals
(page
26
).
Early replacement may be required
when riding in unusually wet or dusty area.
•
Remove the seat
(page 19)
.
•
Remove the air cleaner cover screws (3)
and the cover (4).
•
Remove the left side cover (1) by removing
side cover screws (2).
(1) Left side cover (2) Side cover screws
1
3
(3) Air cleaner cover screws
(4) Air cleaner cover
4
•
Remove the air cleaner element (5)
from air cleaner housing (6).
5
6
(5) Air cleaner element
(6) Air cleaner housing
2
Summary of Contents for IGNITOR TECHNO
Page 4: ......
