HERDEGEN SNC
2, Rue Freyssinet
77500 CHELLES-FRANCE
User’s Manual-Mode d’emploi-Gebrauchsanweisung
Manuel del Usuario
07/12/2017 Rev. 1 (18/04/2018)
7
Two motor chair:
In a two motor chair, the backrest and legsupport move independently: the leg support and backrest need to be adjusted separately.
3.1. Remote control operation
One motor chair:
When pressing on the button located on the left, the chair will stand up.
When pressing on the button located on the right, the chair will recline backward.
Scotty II and Clever II :
Buttons in the first row
When pressing on the button located on the left, the legrest will go down and the chair will stand up.
When pressing on the button located on the right, the legrest will come to an horizontal position.
Buttons located on the second row
When pressing on the button located on the left, the backrest will recline.
When pressing on the button located on the right, the backrest will return to an upright position.
Stylea II:
Buttons in the first row
When pressing on the button located on the left, the legrest will go down and the chair will stand up.
When pressing on the button located on the right, the legrest will come to an horizontal position.
Buttons located on the second row
When pressing on the button located on the left, the chair will stand up.
When pressing on the button located on the right, the chair will recline backward.
Buttons located on the third row
When pressing on the button located on the left, the backrest will recline.
When pressing on the button located on the right, the backrest will return to an upright position.
3.2. Seating into the chair:
1. Make sure that the lift chair is in the standing position.
2. Back into the lift chair and sit in the center of the seat.
3. Activate the DOWN button to lower the lift chair to a comfortable seated position.
3.3. Standing up from a seating position:
1. Activate the UP button to raise up the lift chair until it reaches a standing position.
4. CARE INSTRUCTIONS
For a use in safety and for better longevity, the chair must be regularly cleaned. Before cleaning, unplug the chair from the main power and check
that all other electronic equipment are correctly connected together to avoid fluid going in and to keep the actuator waterproof.
Remove all traces of dirt with a soft cloth and a non-corrosive cleaning product (liquid household, soapy water) before rinsing and drying the chair.
4.1. Fabric care & Composition
The fabrics used for the chair can be velour, microfibres or leather imitation.
PES (polyester), CO (cotton), PAN (acrylic), PVC (Polyvinyl chloride), CV (viscose), MAC
( modacrylic), PW (polyfont), CO/PE (cotton-polyethylene)
PES
CO
PAN
CV
MAC
PW
PVC
CO/PE
Velours fabric
19%
28%
43%
10%
Velours backing
33%
50%
17%
Velours fireproof fabric
52%
10%
13%
25%
Velours fireproof backing
17%
17%
23%
43%
Microfibre fabric
82%
18%
Microfibre backing
70%
30%
Leather imitation fabric
83%
17%
Inspect the fabric on a regular basis for any pulls, tears, or gaps.
Choose the right methods to clean the fabric on your lift chair. In case of doubt and before cleaning your lift chair, consult your authorized provider
for cleaning instructions.
Leather imitation:
A damp soapy cloth should be used regularly to clean and to keep the attractive appearance. Strong detergents, solvent cleaners, polish, wax or
patent chemicals cleaners must not be used. They may be harmful for the material.Some strains like ball pen, food colourings should be cleaned
off immediately to avoid any definitive absorption into the vinyl.
Velours:
1.Professional dry-cleaning.
2.Protect the fabric from direct sunlight. We recommend vacuum on regular basis using low suction. Treat spills and stains as soon as possible.
Gently scrape and sweep any soil or liquid from the surface of the fabric. Do not scrub. Apply appropriate cleaning agents strictly according to
instructions to remove the residue of the spill. It is difficult to give instructions on doing this yourself due to the variety of different fibre and fabric
constructions, each of which requires specialist cleaning techniques. Seek professional advice. Do not saturate the fabric with water or other
cleaning agents. The methods for cleaning should be applied to all areas of the furnishing and not to isolated parts.
