Hercules Wireless G ADSL Modem Router
Modem Router 802.11G-A-54
56/80 – User Manual
5.2.
Entering your ADSL connection settings
- On the Home page, click
Your ADSL connection.
- Tick the
Configure all settings manually box.
All of the requested information will be found on the
reminder sheet
which you have already filled in
(see chapter
5.1. Gathering your ADSL
connection settings
).
- First off, select your
Connection Type (PPPoE,
PPPoA, DHCP or StaticIP).
If you are configuring a PPPoE connection:
- Enter your
Connection Username (Login) and
Connection password.
This information is found in the confirmation of
membership email or letter sent to you by your ISP,
and is already entered on your
reminder sheet
.
- Enter the
VPI (Virtual Path Identifier) and VCI
(Virtual Circuit Identifier).
The default values are 8 for the VPI and 35 for the
VCI.
Once you have configured your connection, don’t forget to click the
Apply and Save button to save
your settings. Doing so will establish an Internet connection, which you can then test (please refer to
chapter
5.2.1. Testing your ADSL connection).
- Verify that your modem router is properly
connected.
- Have a look at the information in the
Download
speed (transfer speed of Internet data to your
computer) and
Upload speed (transfer speed of
data on your computer to the Internet) sections.
This information is quoted in Kilobits per second. A
download speed of 1024Kbps is the equivalent of 1
Megabit per second.
- Finally, you will find your computer’s
IP address
,
which you will need later on in WiFi Manager.
