HERBORNER pumpentechnik UNIBAD-X Operating Manual Download Page 17

Transport

17

Packaging for transportation by HGV

When the pump is transported by HGV it is packed and 

secured on a transport pallet.

4.2.2  Intermediate storage

The freight packaging of the pump and the spare parts 

are suitable for storage for a period of approximately 3 

months.

Storage conditions

An enclosed and dry room with an ambient temperature of 

5 - 40 °C.

4.3 

Transport to the site of installation (by the cus-

tomer)

The pump should only be transported on a transport pallet by 

specialist personnel in accordance with local conditions.

Warning!
An improperly secured pump can 

cause severe injuries.
Make sure that lifting devices and stop 

belts are adequate for the total weight 

of the pump (see section 5.2 'Dimen-

sions').
If necessary, secure the pump during 

transport using separate lifting acces-

sories.
Only set up the pump on a sufficiently 

solid surface that is level in all direc-

tions.

4.3.1  Transport with a forklift truck

-  The forklift must be designed to support 

the weight of the pump.

-  The driver must be authorised to operate 

the forklift truck.

4 Transport

4.1 

Scope of delivery

The detailed scope of delivery can be viewed in the order 

confirmation.

4.2 

Transport and packaging

The pumps are carefully checked and packed before being 

shipped. However, damage developing during transport 

cannot be excluded.

4.2.1  Delivery (including spare parts and replacement 

parts)

Receiving inspection

Check the completeness of the order based on the delivery 

note!

Damage

Check the delivery for signs of damage (visual inspection)!

Complaints

If the delivery has been damaged during transport:

-  Contact the last shipping agent immedi-

ately!

-  Keep the packaging (for possible review 

by the shipping agent or for return ship-

ment)

Packaging for return shipment

If possible, use the original packaging and the original 

packaging material.
If neither is available:

-  Contact a packaging company with spe-

cialist staff if necessary.

  Place the pump on a pallet (which must 

be capable of supporting the weight).

-  Please contact the manufacturer if you 

have any queries with regard to packaging 

and transport security.

Summary of Contents for UNIBAD-X













































Reviews: