Heraeus CRYOFUGE 6000i, Operating Instructions Manual

Page: 11 / 54

Description of Appliance
7
Conformity with standards and regulations
The centrifuges are manufactured and tested in compliance with the following EU directives:
œ
73/23/EEC, Low voltage directive
œ
89/336/EEC, EMC directive
œ
89/392/EEC, Machinery directive
The following standards are applied:
œ
DIN EN 61 010 Part 1, Safety regulations for electrical measuring, control and laboratory appliances
- Contamination level 2
- Excess voltage category II
œ
PR EN 61 010 Part 2-020, Particular requirements of laboratory centrifuges
œ
EN 50081 Part 1, Electromagnetic compatibility (EMC), generic standard Interference transmission
œ
EN 50082 Part 1, EMC generic standard interference immunity
œ
DIN 58 970 Part 1, Laboratory centrifuges – terms, testing, marking
The compliance with the EU directives has been confirmed in a declaration of conformity.
The centrifuges bear the CE symbol.
For operators in Germany, the following regulations for the prevention of accidents apply.
œ
UVV VBG 7z, Centrifuges
œ
UVV VBG 4, Electrical installations and operating material
œ
UVV VBG 20, Refrigerating plants
The certification according to DIN ISO 9001 confirms that KENDRO Laboratory Products has an organisa-
tion which guarantees the compliance and implementation of the EU directives and standards.
Guarantee conditions
The guarantee begins on the day of delivery. Within the guarantee period, the centrifuge will be repaired or
replaced free of charge if processing or material faults can be proved. The requirement for a claim under
the guarantee is that
œ
The centrifuge is used as described in these operating instructions
œ
Assembly, extensions, settings, modifications or repairs are only carried out by persons authorised by
KENDRO
œ
The required service and maintenance work has been regularly carried out.