HemoCue WBC, Operating Manual

Page: 48 / 68

48
Guidance and manufacturer´s declaration – electromagnetic emissions
The HemoCue systems are intended for use in the electromagnetic environment specified below. The customer or
the user of the HemoCue systems should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment – guidance
RF emissions Group 1 The HemoCue systems uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and not likely to
cause any interference in nearby electronic
equipment
RF emissions Class B The HemoCue systems are suitable for use
in all establishments, including domestic
establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2 Class A
Voltage fluctuations/flicker
emissions
IEC 61000-3-3 Complies
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequencyrange applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
Technical specifications (EMC-RF) Use only cables with the following specification:
USB shielded maximum 2 m
Serial shielded maximum 1.5 m