Helo CAMERA-B-KIT, Quick Start Manual

Page: 6 / 152

EN
IV. Getting Started
1. Search for “Helo by Strong” on the Apple App Store or Google
Play Store. Download and install the App.
Cancel
GET
Helo by Strong app
Control Multiple Devices
Only one app manage multiple devices
Helo by Strong app
Control your smart devices !
© 2020. Powered by Strong. All rights reserved.
You can use Helo by Strong App to
control smart lights, smart plugs and
smart devices in your house by voice.
Cancel
INSTALL
Helo by Strong app
Control Multiple Devices
Only one app manage multiple devices
Helo by Strong app
Control your smart devices !
© 2020. Powered by Strong. All rights reserved.
You can use Helo by Strong App to
control smart lights, smart plugs and
smart devices in your house by voice.
Scan it
Note Please make sure that your mobile device OS
is iOS 9.0 or higher, or Android 4.1 or higher.
2. Creating a new account on “Helo by Strong” App.
1 Enter your email address and create a password.
Register
Mobile number/e-mail address
Obtain verification code
EN
III. Indicator Light Illustration
Base Station
Indicator Light 1
Solid Red: Activating
Quick Flashing Red:Waiting for Internet Pairing
Quick Flashing Green:Connecting to Server
Solid Green:Connected to Server Successfully
Slow Flashing Red: Device Fault
Slow Flashing Green: Device Upgrading
Indicator Light 2 Flashing Green: Adding camera; The indicator light
will turn off after completion
SYNC Key SYNC:Press the SYNC key, the Base Station will enter
Adding camera status
Siren Off :When Siren on, press the SYNC key to turn it off
Power Port Power Supply Port
SD Card Slot For local Storage (SD Card Max Capacity: 128GB)
USB Slot Connect USB storage device for local storage, up to 2TB
WAN Port Port to connect Router’s LAN port
Reset Button Press and hold for 3s, the base station will be reset.
Camera
Indicator Light
Red LED blinks quickly: Standby for confi guration.
Green LED blinks quickly: Network pairing.
Green LED on : Camera online.
Yellow LED blinks slowly : Firmware upgrade.
Solid White LED ON : Camera charging
Red LED blinks slowly : Device fault.
On/off Button SYNC: Press the button, then the device will enter Waiting
for Pairing status.
Power Button: Press the button to wake up it when the
camera is in deep sleep mode; Press and hold the button
for 3s, the camera will enter deep sleep mode.
USB Charging Port Charging port
Reset Button Press and hold for 3s, the device will power off and
reboot after reset setting, but the camera will not
be unbound.