background image

40

COMMERCIAL WATER SOFTENER & FILTER LIMITED WARRANTY

INCLUDES – H125, H125 HE, H151, H151 HE, H200, H200HE, H200M, H300, 

NF, TS, TN2 & TNT SYSTEMS

Hellenbrand, Inc., (“Hellenbrand”) warrants to the original purchaser that the system and the parts listed below will be free from defects in material 

and/or workmanship from the date of the original installation for the following time periods:

 

For a Period of FIVE YEARS: The filter control valve electrical parts including the motor and board, control valve body, and internal parts. 

 

For a Period of FIVE YEARS: SystemMate Controller.

 

For a Period of TEN YEARS: Mineral tanks, 6” Diameter - 13” Diameter.

 

For a Period of FIVE YEARS: Mineral tanks, 14” Diameter - Up.

 

For a Period of FIVE YEARS: The salt storage/cabinet tank.

 

For a Period of ONE YEAR: The entire water conditioner system (“System”).

Any parts used for replacement are warranted for the remainder of the original warranty period for the applicable part.

THIS WARRANTY IS EFFECTIVE TO THE ORIGINAL PURCHASER ONLY, AND ONLY FOR AS LONG AS THE SYSTEM REMAINS 

AT THE ORIGINAL INSTALLATION SITE.  COVERAGE TERMINATES IF YOU SELL OR OTHERWISE TRANSFER THE SYSTEM OR IF 

THE SYSTEM IS MOVED FROM THE ORIGINAL INSTALLATION SITE.

No sales representative, distributor, agent, dealer, reseller, authorized seller or any other person or entity is authorized to make any other warranty, or 

modify or expand the warranty provided herein on behalf of Hellenbrand.  Upon expiration of the applicable warranty period, Hellenbrand shall have 

no further liability related to the System/parts to which the warranty period applies, except with respect to valid warranty claims asserted during the 

appropriate warranty period.

If the System or any part described above becomes defective within the specified warranty period, you should notify your local authorized seller of 

Hellenbrand products, and arrange a time during normal business hours for the inspection of the System at the original installation site.  You may also 

contact Hellenbrand and we will provide you with the contact information for your local authorized seller of Hellenbrand products.  Hellenbrand, at its 

option, will repair or replace the System or any part found defective within the terms of this warranty.  You are responsible for freight from our factory and 

any service fees charged by the local authorized seller of Hellenbrand products for installation, repair, removal, replacement, service, etc., of any System or 

parts. This warranty does not include any labor charges.  This paragraph sets forth the exclusive remedy for any valid warranty claims against Hellenbrand.

THIS WARRANTY DOES NOT COVER defects caused by sand, sediment or bacteria fouling, accident, fire, flood, Act of God, misuse, misap-

plication, neglect, alteration, installation or operation contrary to Hellenbrand’s printed instructions, or installation, repair or service by anyone other 

than Hellenbrand or an authorized seller of Hellenbrand products.

IN ADDITION, THIS WARRANTY DOES NOT COVER UNPROTECTED OUTDOOR INSTALLATIONS.  This System, including all of the 

electrical components, must be protected against windblown dust, falling and windblown rain, freezing temperatures and the formation of ice, with 

an appropriate enclosure consisting of a floor, roof, walls, ventilation and heat. 

As a manufacturer, we do not know the characteristics of your water supply or the purpose for which you are purchasing this system.  You should be 

aware that the quality of water supplies may vary seasonally or over a period of time, and that your water usage rate may vary as well.  Water character-

istics may change considerably if this System is moved to a new location.  For these reasons, Hellenbrand assumes no liability for the determination of 

the proper equipment necessary to meet your needs; and Hellenbrand does not authorize others to assume such obligations for Hellenbrand.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, REMEDIES FOR DEFECTS OR FAILURES ARE LIMITED TO THE REMEDIES 

PROVIDED IN THIS WARRANTY.  THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SET FORTH HEREIN.  TO THE EX-

TENT PERMITTED BY APPLICABLE LAW, HELLENBRAND HEREBY DISCLAIMS ALL OTHER WARRANTIES, WHETHER STATUTORY, 

EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICU-

LAR PURPOSE, NON-INFRINGEMENT, OR ANY WARRANTIES ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, 

OR FROM USAGES OF TRADE.  

UNDER NO CIRCUMSTANCES SHALL HELLENBRAND BE LIABLE TO THE ORIGINAL PURCHASER OR TO ANY OTHER PERSON 

FOR ANY INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER LOSS, DAMAGE, OR EXPENSE 

OF ANY KIND, INCLUDING LOSS OF PROFITS, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, 

IN TORT OR OTHERWISE, AND REGARDLESS OF WHETHER HELLENBRAND WAS AWARE OF THE POSSIBILITY OF SUCH LOSS.  

THESE LIMITATIONS WILL APPLY REGARDLESS OF ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.  Similarly, some states 

do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This 

warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Summary of Contents for H-151 Series









































Reviews: