Hellenbrand H-151 Series, Owner'S Manual

Page: 38 / 40

38
H151 SPECIFICATIONS
(800398) H151(SUPTER HP) SPEC SHEET
Page 1
R:\800398 H151 Super HP Spec Sheet Rev D
H151 H151 H151 H151 H151 H151 H151
Model # 60 90 120 150 150-21 180 180-21
Factory Regeneration Settings
Backwash Minutes 10 10 10 10 10 10 10
Gallons 42 42 53 75 90 75 90
Brine/Rinse Minutes 60 60 60 60 60 60 60
Gallons 45 78 84 120 150 120 150
Fast Rinse Minutes 6 6 6 6 6 6 6
Gallons 25 25 32 45 54 45 54
Total Regeneration Gallons
112 145 169 240 294 240 294
Refill LBS / Minutes Lbs. Min. Lbs. Min. Lbs. Min. Lbs. Min. Lbs. Min. Lbs. Min. Lbs. Min.
Efficient Salt 10 6.7 15 10 20 13.5 25 4.2 25 4.2 30 5.0 30 5.0
Low Salt 12 8.0 18 12.0 24 16.0 30 5.0 30 5.0 36 6.0 36 6.0
Medium Salt 20
14
30
20
40
27 50
8.5
50
8.5
60
10
60
10
High Salt 30 20 45 30 60 40 75 12.5 75 12.5 90 15 90 15
Capacity - Efficiency Grains Grains Grains Grains Grains Grains Grains
Efficient - 4000 grains/lb. 40,000 60,000 80,000 100,000 100,000 120,000 120,000
Low Salt - 3821 grains/lb. 45,852 68,778 91,704 114,630 114,630 137,556 137,556
Medium Salt 2800 grains/lb. 56,000 84,000 112,000 140,000 140,000 168,000 168,000
High Salt 2133 grains/lb. 63,990 95,985 127,980 159,975 159,975 191,970 191,970
Service Flow Rates * GPM GPM GPM GPM GPM GPM GPM
Continuous @ 15 psi 35 35 40 44 52 43 51
Peak @ 25 psi 45 46 52 57 67 56 65
Flint Under bed (lbs.) 30 35 40 50 85 50 85
High Capacity Resin (cu.ft.) 2 3 4 5 5 6 6
Resin Tank Size 13x54 14x65 16x65 18x65 21x62 18x65 21x62
Recommended Brine Tank 18X40 18X40 24X41 24X50 24X50 24X50 24X50
Grid Height 5" 8" 6" 6" 6" 6" 6"
Min/Max Salt Setting in Lbs. 7/28 17/35 23/60 23/76 23/76 23/76 23/76
DLFC (gpm) 4.2 4.2 5.3 7.5 9 7.5 9
BLFC (gpm) 0.5 0.5 0.5 2 2 2 2
Injector Size C-RED D-WHITE E-BLUE
F-YELLOW
G-GREEN
F-YELLOW
G-GREEN
Injector Draw Rate (gpm@50psi)
0.55 0.65 1.0 1.3 1.8 1.3 1.8
Injector Slow Rinse Rate (gpm@50psi)
0.75 1.3 1.4 2.0 2.5 2.0 2.5
Brine Line Size 3/8" Poly 3/8" Poly 3/8" Poly 1/2" Poly 1/2" Poly 1/2" Poly 1/2" Poly
*Service flow rates are with hub and lateral type of distributor and may be lower with a stack type of distributor.
Factory Default settings show in bold
800398 Rev D
4/7/2017
H151 (SUPER HP) Specifications