Eradicator Gen II O
3
Manual Supplement
Install & Service Guide
11
Copyright ©2021 Aqua Systems, All Rights Reserved • 404 Moravian Valley Road, Waunakee, WI 53597
Button Combination Quick Reference Guide
Regen Button
From any user screen, Press and release REGEN to set a
regeneration to occur at the next scheduled time. REGEN
TODAY will alternate on top line of display when activated.
Press and release again to deactivate.
Press REGEN & hold to initiate an immediate regeneration
cycle.
While in any programming or Diagnostic Mode, the REGEN
button will reverse direction to the previous screen viewed.
Soft Reset
From any user screen, Press NEXT & REGEN together and
hold until control resets.
Will drive all motorized pistons to the Home Position and re-
set the circuit board. Will retain all programming parameters.
Will display software version when board powers up.
Diagnostics and History
From any user screen, Press the UP and DOWN buttons
together and hold to enter Diagnostics. Once in Diagnostics,
Press and hold again to advance to History.
Service Alarm Reset
While on the Service Alarm Screen, or in the set screens
for Gallons or Time, Press Up & Down together and hold to
reset the Service Alarm. See Service Alarm Tech Bulletin for
details on this feature.
Lock and Unlock Control
Press DOWN then NEXT then UP then CLOCK in sequence
to Lock or to Unlock the control.
REGEN
REGEN
NEXT
CLOCK
NEXT
