10-SSI-001_rev.005_ENG
Page
17
of
51
4. Accumulation of water at the solar module must be prevented; might cause corrosion
on the adhesive bonding or on the PVB foil between front and back glass.
This is a fully integrated on roof mounting system. It is composed by:
Assembly system: Model S2 PLUS, made by aluminum, EN-AW 6063.
HelioSphera modules have been designed and tested, according to IEC 61646 paragraph
10.16, to a maximum mechanical loading of 2400 Pa (2, 4 N/m
2
or 240 Kg/m
2
).This loading can
be any combination of snow, ice or wind. In order to withstand this load, the module should be
supported as shown in Fig. 12.
Fig. 12
HS Venus’ mounting instructions
For further information about the mounting elements, please, contact HelioSphera.
Any roof installation should comply with the local building regulations.
1
2
3
4
5
6
7
8
Summary of Contents for HS Atlas Series
