HEKA Elektronik EPC 10 USB, Hardware Manual, Page: 71 / 81

12.5 Connecting Cables 65
EPC 10 USB Lambda 10-3
PIN # Signal PIN # Signal
13 OUT-0 2 Command Bit 0 (Filter Position)
12 OUT-1 3 Command Bit 1 (Filter Position)
2 OUT-2 4 Command Bit 2 (Filter Position)
1 OUT-3 5 Command Bit 3 (Filter Position)
14 OUT-4 6 Command Bit 4 (Speed)
15 OUT-5 7 Command Bit 5 (Speed)
16 OUT-6 8 Command Bit 6 (Speed)
17 OUT-7 14 Command Bit 7 (Shutter A)
18 OUT-8 9 Command Bit 8 (Wheel Select Bit)
19 OUT-9 16 Command Bit 9 (Shutter B)
4,11 GND 24 GND
Table 12.8: Pin assignments of Digital Out Connector of EPC 10 USB and Parallel Port connector of Lambda
10-3. OUT = Digital Output Line; GND = Ground Line
12.5.2 ValveLink 8 to EPC 10 USB
On request there is a connecting cable available to connect the ValveLink 8 controller (order number: 895113).
Figure 12.6: DSub-25 (male) to DSub-9 (male) connecting cable
http://www.heka.com