Heinner HDF-1850XMC, Manual

Page: 22 / 69

www.heinner.com 1550-1850W, 50Hz, 220-240V
21
Filling the Oil Reservoir:
1. Pour cooking oil into the oil reservoir making sure that it is between the
“Min” and “Max” fill lines in the oil container.
Do not under fill or overfill . The
oil levels must be maintained between the minimum (2 liters) and the
maximum levels (3 liters) marked inside the oil container.
2. You can use blended vegetable oil, corn oil, or canola oil.
Do not use olive
oil, margarine, lard or drippings . Never mix old and new oil together or
different oils and fat.
USING SOLID FAT:
WARNING
: Do not put solid shortening in the oil reservoir or the frying basket.
1. If using solid vegetable shortening, melt it first in a separate container and
then very carefully pour the melted fat into the oil reservoir.
2. Previously used solid vegetable shortening which has curdled and hardened
in the oil reservoir should be removed from the oil reservoir and melted in a
separate pan before reusing.
WARNING: If you try to melt the solidified fat in the oil reservoir, there is a risk
of hot melted fat suddenly sputtering from below through the solid top layer of
fat.
USE ONLY THE FOLLOWING PROCEDURE WHEN MELTING SOLID FAT IN YOUR
DEEP FRYER:
1. Make sure the fat is at room temperature. If the fat is cold, then there is a
greater risk of splashing.
2. Using a fork, carefully make some holes in the fat.
3. Make sure the lid is
always securely closed while the fat is melting.
4. Set the temperature control to 325°F.
IMPORTANT: Setting the temperature will automatically turn the deep fryer
“ON” and the power light will illuminate. The ready light will illuminate when
the fat or oil in the reservoir has reached the selected temperature.
PREHEATING:
WARNING:
Never plug in the deep fryer before filling the oil reservoir with oil.
Always unplug the appliance when it is not in use.
1. Make sure that the oil level in the oil reservoir is between the “MAX” and
“MIN” fill lines inside the oil container.
2. Place the cover onto the deep fryer.
3. Insert the plug into the electrical wall outlet. The power on light will
illuminate.
4. Turn the temperature control to the desired temperature.
5. Press the “ ” button two times.
6. Press the “MIN/SEC ” to set the minutes. The minutes will increase at one (1)
minute intervals.