Heiniger DELTA3, Instruction Manual

Page: 16 / 152

4 Instruction manual DELTA3
1.4 Equipment items
1 Clipping machine
1 Pair of clipping blades
1 Special screwdriver
1 Bottle of special lubricating oil
1 Cleaning brush
1 Operating instructions
1 Transport and storage case
2 Safety regulations
2.1 Introduction
This section describes the mandatory safety instructions which must be observed when using
the clipping machine.
All persons undertaking work on or with the machine have an obligation to read the
operating instructions.
The operating instructions must be kept safely in the storage case, and be accessible at all
times.
2.2 Symbols and warning signs
Various symbols are used in the operating instructions. They refer to potential dangers or
point to technical information, the non-observance of which will lead to injury to persons,
damage to property or inefficient operation.
1.2 Intended use
The clipping machine is exclusively intended for the shearing of cattle and horses.
Other uses, and in particular using the machine on people, are expressly prohibited.
1.3 Technical data
Model designation: Delta3
Mains voltage:
Motor output:
RPM:
Fuse protection needed:
Dimensions (B/H/L):
approx. 79 mm x 105 mm x 310 mm
Weight, excluding cable: 1320 g
Max. ambient temperature: 0°C - 40°C
Max. air humidity:
10% -90% (relative)
Noise emission (LpA): 77 dB(A) (EN 50144-1/02.96 & EN ISO 3744/11.95)
Acceleration (ahw): < 2.5 m/sec2 (EN 28662-1/01.93)
We reserve the right to make technical changes and improvements without notice.
see machine nameplate